ospfv3:If

OSPFv3 information operated at interface level

Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME DATA TYPE DESCRIPTION PERMITTED VALUES
adminSt nw:IfAdminSt
(nw:AdminSt)		 The administrative state of the object or policy. SELECTION:
1 - enabled
2 - disabled
advSecondary scalar:Bool
 Advertise secondary IPv6 addresses SELECTION: true or false
DEFAULT: true
area ospfv3:AreaId
(string:Basic)		 Area associated with interface A sequence of characters
bfdCtrl ospfv3:BfdControl
(scalar:Enum8)		 Bidirectional Forwarding Detection (BFD) control SELECTION:
0 - unspecified
1 - enabled
2 - disabled
DEFAULT: unspecified
cost ospfv3:IfCost
(scalar:Uint16)		 Cost associated with interface
RANGE: [0 , 65535]
DEFAULT: unspecified
deadIntvl ospfv3:DeadIntvl
(scalar:Uint32)		 Dead interval, interval during which at least one hello packet must be received from a neighbor before the router declares that neighbor as down
RANGE: [0 , 65535]
DEFAULT: unspecified
helloIntvl ospfv3:HelloIntvl
(scalar:Uint16)		 Interval between hello packets that OSPFv3 sends on the interface
RANGE: [1 , 65535]
DEFAULT: 10
instance ospfv3:InstanceName
(naming:Name)		 OSPFv3 instance name used with area command
MAX SIZE: 20
instanceId ospfv3:InstanceID
(scalar:UByte)		 OSPFv3 instance identifier under interface
RANGE: [0 , 255]
DEFAULT: 0
mtuIgnore scalar:Bool
 Disable OSPF MTU mismatch detection SELECTION: true or false
nwT ospfv3:NwT
(scalar:Enum8)		 Network Type, can be Point-to-point or Broadcast SELECTION:
0 - none
1 - p2p
2 - bcast
DEFAULT: none
passive ospfv3:PassiveControl
(scalar:Enum8)		 Suppress routing updates on the interface SELECTION:
0 - none
1 - enabled
2 - disabled
DEFAULT: none
prio ospfv3:DesigPrio
(scalar:UByte)		 Router priority, used in determining the designated router on this network
RANGE: [0 , 255]
DEFAULT: 1
reTxIntvl ospfv3:ReTxIntvl
(scalar:Uint16)		 Retransmit interval, the time between LSA retransmissions
RANGE: [1 , 65535]
DEFAULT: 5
txDelay ospfv3:TxDelay
(scalar:Uint16)		 Transmit delay, estimated time needed to send an LSA update packet
RANGE: [1 , 450]
DEFAULT: 1
Operational Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
bkupDr address:Ip
 Backup designated router IPv6 Address Value must match ipv4 or ipv6 known format
bkupDrId ip:RtrId
(address:IPv4)		 Backup designated router identifier Value must match ipv4 format
dr address:Ip
 Designated router IPv6 Address Value must match ipv4 or ipv6 known format
drId ip:RtrId
(address:IPv4)		 Designated router identifier Value must match ipv4 format
flags ospfv3:IfFlags
(scalar:Bitmask8)		 Interface flags to indicate state of interface SELECTION:
1 - admin-up
2 - proto-up
ipv6Addr address:Ip
 IPv6 address of interface Value must match ipv4 or ipv6 known format
lsaCksumSum ospfv3:LsaCksumSum
(scalar:Uint32)		 link-state advertisement checksum Sum RANGE: [0, 4294967295]
operCost ospfv3:IfCost
(scalar:Uint16)		 Operational cost of interface
RANGE: [0 , 65535]
DEFAULT: unspecified
operDeadIntvl ospfv3:OperDeadIntvl
(scalar:Uint32)		 Interface operational dead interval SELECTION:
0 - unspecified
DEFAULT: unspecified
operSt ospfv3:IfOperSt
(scalar:Enum16)		 Interface operational state, can be p2p, loopback, etc. SELECTION:
0 - unknown
1 - down
2 - loopback
3 - waiting
4 - p2p
5 - dr
6 - bdr
7 - dr-other
DEFAULT: down
type ospfv3:IfType
(scalar:Enum8)		 Type of interface, p2p or broadcast etc. SELECTION:
0 - none
1 - loopback
2 - p2p
3 - p2mp
4 - nbma
5 - bcast
DEFAULT: none
Internal Properties
PROPERTY NAME DATA TYPE DESCRIPTION POSSIBLE VALUES
dom ospfv3:DomName
(l3:VrfName)		 Dom to which the interface belongs to
id nw:IfId
(base:IfIndex)		 An identifier . Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100
modTs mo:TStamp
(scalar:Date)		 The time when this object was last modified. SELECTION:
0 - never
DEFAULT: never
status mo:ModificationStatus
(scalar:Bitmask32)		 The upgrade status. This property is for internal use only. SELECTION:
2 - created
4 - modified
8 - deleted
16 - replaced